Skip to content

Advanced Conversations: Multi-turn Adjustments, Rollback, and References ​

After getting your first task working, the real daily routine is repeatedly refining results within the same task. This page explains the advanced operations of WorkBuddy conversations: how to navigate long conversations, how to interject during execution, how to use references to point at a specific piece of content to change it, and how to roll back when things go off track—in 12 minutes, turn the conversation area from a "chat box" into a "mission control console."

This is lesson 1 of "Daily Use," based on WorkBuddy v5.9.3, with operations following the official "Task Conversations" documentation.

What You'll Be Able to Do After Learning ​

  • In long multi-turn conversations, use the tick-mark navigation on the right or "Question History" to jump to any round of questioning with one click
  • Send additional messages at any time during execution: new messages queue up, and you can also edit, delete, and reorder them by dragging
  • Use "Add to Conversation" to reference text, tables, or chart components in the model's reply, attach a one-line note for precise modification—no copy-pasting needed
  • Distinguish three correction operations: rollback (goes back without regenerating), edit (rewrite and rerun), refresh (regenerate the last reply), and understand the artifact version confirmation dialog
  • Copy chart components in the conversation as images, save them as images, or copy the code, and take them straight to your reports

Your Current Struggles ​

  • The conversation has scrolled past a dozen screens and you want to find that version of the table from "the third round when I asked it to change the sorting," but you can't locate it no matter how long you scroll
  • It's running and I suddenly think of adding "also add a pie chart"—I don't know if I can interject, so I can only wait idly
  • It keeps drifting further off course, and I want to go back to the very first version, but I'm afraid that once I send another message I can never go back

When to Use This Technique ​

When you need to:

  • Continuously refine results within the same task: add charts, change sorting, adjust the tone—rather than starting over every time
  • Precisely point at a specific piece of output and say "right here, change it to this"
  • Add requirements at any time during execution so the waiting time isn't wasted
  • Safely roll back to a point in time when things go off track, preserving a still-usable version

And you don't want to:

  • Re-describe the entire background every time you change one thing
  • Manually copy and paste tables from replies back into the input box
  • Rerun the whole task from scratch after breaking something

🎒 Preparation Before Starting ​

  • Completed 2.0 Daily Use: Making WorkBuddy Your Work Companion, and gotten 1.4 First Task working
  • A practice task you can tinker with repeatedly—recommended: start a task with the official example "Help me generate an analysis report from this sales data, including charts," and use it for practice in every step that follows
  • 12 minutes of reading time

💡 Does it cost credits?

All WorkBuddy conversations consume credits, and every round of multi-turn adjustment counts; rollback only goes back and does not trigger regeneration. The free trial version includes 500 basic credits per month—see 2.6 Credits and Pricing for details.

Core Idea ​

WorkBuddy conversations' mental model: it's not a chat log, it's a workflow with version history. Three key concepts:

ConceptMeaningCorresponding Operation
Context continuitySubsequent messages are processed based on the existing conversation, no need to repeat backgroundJust send incremental requirements
Traceable versionsMessages and artifacts are bound to versions and roll back togetherRollback / Edit / Refresh
Reference as pointerInstead of copying content, attach "a piece of output" to a new messageAdd to Conversation

It works differently from the chat-style AI you're familiar with:

Traditional Chat AIWorkBuddy Conversations
Can only append messagesCan roll back (except the first message), edit any message, and refresh the last reply
Text in, text outMessages and artifact versions are bound; rollback reverts files along with them
Referencing means manual copy-pasteText, tables, and components can be added to the conversation with one click via "Add to Conversation"
Can only wait while generatingMessages go into a queue and line up at any time

Follow Along ​

Step 1: Get to know the WorkBuddy conversation area and learn how to navigate long conversations ​

Why: The first enemy of multi-turn conversations is "can't find it." Get familiar with the navigation tools first, and you'll stay calm no matter how long the conversation gets.

At the top of the conversation area (next to the task title), from left to right, there are four commonly used entry points:

Entry PointPurpose
Open in CodeBuddyOpen the current task's workspace in CodeBuddy to continue code development (only shown when CodeBuddy is installed locally and the task is in code development mode)
Search within a conversationEnter keywords to quickly find the target conversation content
Share a taskAutomatically generate a public link and share it to any channel
Show the details panelOpen the right sidebar: view artifacts, all files, file changes during the conversation, and the built-in browser

When the conversation gets long, a vertical scale navigation appears on the right side of the conversation area: each tick corresponds to one question you sent, and the tick for the question you are currently on is longer and darker. It works the same as the "History of questions" button at the top, but without clicking a button, making it more convenient in long conversations:

  • Hover over the tick bar and a list of all the questions you sent expands—it only shows your questions, not WorkBuddy's replies, and overly long questions are truncated
  • Click any question in the list (or click a tick directly), and the conversation area jumps to that one
  • When you manually scroll the conversation area, the current position on the navigation changes in sync

💡 Scale navigation not showing up?

It has three display conditions: it only appears after the conversation reaches a certain number of rounds and is not shown when there are very few questions; it automatically hides when the conversation area is too narrow (for example, when the conversation area is squeezed after opening the right details panel), and reappears after you collapse the panel or widen the window; it is only available for local tasks in the main window, and is not shown in standalone windows or cloud tasks.

You should see: after the conversation reaches a certain number of rounds, the tick bar appears on the right; when you manually scroll the conversation area, the current position on the navigation moves in sync.

  • I can use the scale navigation (or the top "History of questions") to jump back to a previous round

Step 2: Multi-round adjustments, keep making requests based on context ​

Why: The official statement—WorkBuddy handles subsequent messages in combination with the current conversation context. So starting from the second round, you don't need to state the background; just say "what to change."

Three typical scenarios (examples are from the official documentation):

ScenarioDescriptionOfficial example
Add task requirementsKeep the direction, add content, refine requirements, or add constraintsAdd one more pie chart; make the font a bit bigger
Adjust existing resultsThe generated result doesn't match expectationsSort the table by sales; add an executive summary to the report
Continue processing or dig deeperFollow-up actions based on the current resultHelp me export it as a PDF; also analyze the month-over-month changes

Send these one by one with the practice task: "Add one more pie chart" → "Sort the table by sales" → "Help me export it as a PDF".

💡 Don't know what to say in the next round? Check the recommendations

After completing a round of conversation, recommended next-step prompts appear above the input box: clicking a recommendation fills the full content into the input box (replacing existing text, but not sending automatically, so you can edit before sending); if you're not satisfied, click "Get another" to load a new recommendation; if you don't need it for now, you can close it—once closed, recommendations are no longer shown in the current session, and after sending a new message, the previous round's recommendations are also automatically hidden.

You should see: in each round it directly modifies the previous round's result, without asking you to re-describe where the data is or what format the report is in.

  • I sent 2–3 rounds of incremental requests in a row, and it handled them all based on context

Step 3: Append messages during execution, make good use of the message queue ​

Why: Model execution takes time, so if you think of something to add, don't just wait—queue it up first.

Steps:

  1. While the model is executing, just type and send in the input box—no need to wait for the previous round's reply to finish
  2. New messages enter the message queue above the input box and won't interrupt the ongoing output
  3. Messages in the queue can be edited (reworded), deleted (not sent), or dragged to reorder (adjust the processing order)
  4. To make a message enter the conversation flow immediately, just click the send button—it will be sent right away and steer the current session, but it likewise won't interrupt the ongoing model output
  5. After the current round of output (including tool calls) finishes, the queued messages are handed to the model in order to continue processing

You should see: messages first queue up above the input box; once they enter the conversation flow, they show the send time and can be copied, but cannot be recalled or edited—so if you want to make changes, there's still time while they're queued; once sent, they can no longer be changed.

  • I sent a queued message during execution and adjusted its order or content

Step 4: Use references to precisely modify text, tables, and components ​

Why: "The third paragraph of the report is too wordy" is not as good as directly selecting the third paragraph and having it revised. A reference is a precise pointer, and you can attach a note to it.

Referencing text (three small steps):

  1. In the model's reply, select the text you want to reference; an action bar appears above the selection (Copy / Add to conversation)
  2. Click "Add to conversation", and the selected content is added to the input box as a reference
  3. A note input box appears next to the selection (optional)—write how you want it changed, for example, "This paragraph is too wordy, compress it into two sentences"; you can also skip the note and continue adding details directly in the input box

Referencing tables and components:

ObjectEntry point
TableHover over the table and an "Add to conversation" icon appears in the top-right corner; click it and a table reference is added to the input box
Component (Widget, e.g., charts, visualization pages)The top of the component also has an "Add to conversation" icon; after clicking, a hint appears in place saying "Added to conversation"

💡 Three official usage tips for references

  • You can add multiple references in a row; text, tables, and components can be mixed in the same message
  • Every reference has a delete entry; after deletion, the corresponding reference marker in the body is also removed
  • You can send just references without adding any text; after sending, the referenced original text and notes are passed to the model together

Hover over a reference in the input box to view the complete original text being referenced (shown together with the note, if there is one).

Components can also be taken away directly: In the top-right corner of a component, from left to right, are "Add to conversation", "Download locally", and "More actions (⋯)"; the ⋯ menu provides:

ActionDescription
Copy as imageCopy what the component currently displays to the clipboard so it can be pasted directly into other apps; on success it says "Image copied", on failure it says "Image copy failed"
Save as imageSave the component as an image file; on success it says "Image saved"
Copy codeCopy the component's source code
View codeSwitch to displaying the component's code, then click "Show UI" in the same place to switch back to the component view

Note: while a component is still being generated and its content hasn't finished loading, "Copy as image" and "Save as image" are temporarily unavailable—wait until loading finishes before using them; these two options are not yet supported on mobile.

You should see: a reference entry appears in the input box, and hovering over it shows the complete original text being referenced.

  • I referenced a piece of text or a component and attached a note

Step 5: Roll back, edit, and refresh—three ways to correct a conversation ​

Why: If the direction is wrong, don't force a fix. Each of the three operations handles one thing:

ActionApplies toEffectMnemonic
Roll backAny message you sent (except the first one)The conversation and artifacts together return to the state before that messageOnly goes back, no regeneration
EditAny message you sentAfter rewriting, starts over from that messageUndo + rewrite
RefreshOnly the last replyRegenerate this reply and its artifactsNot satisfied, try again

Entry point: hover over a message you sent, and three buttons appear below the message: "Copy", "Rewind", and "Edit"; "Refresh" appears only below the last reply (with the hover tip "Clicking will regenerate the conversation and artifacts; proceed with caution").

Note two prerequisites: these cannot be used while a task is running—you must wait for the current round to finish; and only local tasks are supported—cloud tasks and project tasks do not offer them. These operations change the conversation content and may affect already-generated artifacts, so a confirmation dialog pops up before the operation—read it carefully before confirming.

Rewind (hover tip "Roll back the conversation and artifacts to before this message"): the conversation content and artifacts together return to the state before this message, and this message and everything after it will be removed from the conversation. There is nothing before the first message, so the first message does not show a rewind button. Clicking Rewind always pops up a confirmation dialog, whose content depends on whether artifacts are involved after this message:

CaseConfirmation dialog titleResult
Artifacts involvedRoll back the conversation and the following artifact versions to before this message?Lists the affected artifacts and how they will be handled; after confirmation, the conversation and artifacts roll back together
No artifact versions in the entire conversationThe current conversation has no artifact versions; rewinding will only roll back the conversation contentOnly the conversation content rolls back; artifacts remain unchanged
Other casesRoll back the conversation to before this message?Rolls back the conversation content

In the confirmation dialog, each artifact is followed by a label indicating how it will be handled:

LabelMeaning
Roll back to the Month-Day/Hour:Minute versionThe artifact returns to the version from before this message
Roll back to a historical versionThe artifact returns to a previous version, but the specific time cannot be shown
Will be deletedThis artifact was generated after this message, so it will be deleted after the rewind
The historical version has been deleted; the current version will be keptThe previous version can no longer be found; the artifact stays as is
Version will not roll backThis artifact has no earlier version; after the rewind the file remains in the directory

Edit: after clicking "Edit", the message becomes editable, and a hint below the input box reads "After editing, the conversation will restart from this point, and artifacts will also roll back to the version before this message". After making changes, click "Send" to reprocess starting from this message, or click "Cancel" to discard the changes.

After you click Send, WorkBuddy first checks whether any artifacts were modified after this message—only if there were modifications does it pop up "Roll back artifact historical versions?":

ButtonEffect
CancelDo not edit; keep everything as is
Don't roll backArtifacts keep their latest version, and modifications continue based on the latest version
Roll backArtifacts return to the version from before this message, and modifications then proceed from that version

If no artifacts were modified after this message, clicking Send restarts directly without popping up a confirmation dialog.

Refresh: only the last reply has this button; earlier replies and content during execution do not. Refresh regenerates this reply and its artifacts; if artifacts were modified in this round, it likewise pops up "Roll back artifact historical versions?", with the buttons meaning the same as in "Edit"; if no artifacts were modified, it regenerates directly.

⚠️ Don't panic if an operation fails

Rewind failure: a notice at the top of the page reads "Conversation rewind failed, please try again later.", and the conversation and artifacts stay in their pre-rewind state. Edit failure: the notice reads "Conversation edit failed, please try again later.", your edited content is kept in the edit box, and you can simply try again. Refresh failure: the notice reads "Conversation resend failed, please try again later.", and the original reply and artifacts remain unchanged.

You should see: hover over a message you sent, and three buttons appear below it: "Copy", "Rewind", and "Edit".

  • I can clearly explain when to use each of the three operations

Step 6: Interrupt, continue, and view execution progress ​

Why: with long tasks you don't have to stand watch, and you don't need to fear interruption—an interruption doesn't mean the work is wasted.

Interrupt: while a task is running, the input box area shows a stop entry point, so you can interrupt the current execution at any time. After interrupting, you can still: add new instructions, adjust requirements and resend, or continue based on existing content—the key is to keep the conversation continuous rather than starting over every time.

View the execution process: WorkBuddy displays key steps and results in the conversation area, and you will usually see:

  • WorkBuddy's reply content
  • Stage descriptions during execution (e.g., "Analyzing data", "Generating report")
  • Summaries of generated results
  • Intermediate steps you can expand to view

Input, process, and output are all in the same place—you don't need to leave the current task.

MCP service loading: when a session needs to connect to MCP services, the conversation stream shows connection progress, so you don't mistake the wait for a hang—it displays "Connecting MCP services" and the number connected / total number of services (you can expand the details, which list service names grouped by connected and not connected), and when everything is connected it shows "All MCP services are ready". This progress appears only temporarily during the loading phase and disappears from the conversation stream once complete; it is not kept as a history message. For how to connect MCP services, see 5.2 Connectors and MCP.

💡 When an MCP app has an interface, you can operate it directly

In desktop tasks, if a connected MCP app provides an interactive interface, WorkBuddy can display that interface in the conversation or in the artifacts area on the right—you can select options, fill in content, and submit actions directly in it; the specific features depend on that app's interface. If it cannot be opened, first check whether the corresponding service is connected, then start the task again.

You should see: after an interruption the conversation is still there, and it can handle your next message in context.

  • I have interrupted an execution once and successfully continued with a new request

For detailed operations, refer to the official documentation: Task conversations.

Checkpoints ✅ ​

  • Can use the scale navigation or "History questions" to jump straight to a specific round of questions in a long conversation
  • Have queued messages during execution, and edited or reordered them
  • Have used "Add to conversation" to reference text/tables/components, and know that annotations are optional
  • Can clearly explain the differences between rewind, edit, and refresh, and the prerequisite that they are "available only for local tasks"
  • Know that chart components can be copied as an image, saved as an image, and copied as code

Pitfall reminders ​

❌ Looking for the rewind button while the task is still running ​

Symptom: you want to retract a message you just sent, but hovering over it shows no rewind/edit buttons.

Cause: these three operations cannot be used while a task is executing; moreover, only local tasks offer them—cloud tasks and project tasks do not.

Correct approach: wait for this round of output to finish before operating; if it's running and you want to change requirements, just send a new message into the queue.

❌ Assuming a rewind will automatically produce a new version ​

Symptom: after rewinding you sit waiting for a new result, but nothing happens.

Cause: the official position—rewind only rolls things back; it does not make WorkBuddy regenerate content.

Correct approach: if you want a new result, send a follow-up message after rewinding, or use "Edit" to rewrite and rerun instead.

❌ Ignoring the artifact labels in the confirmation dialog and clicking confirm all the way ​

Symptom: after rewinding you find that a table generated later is gone, or a file version isn't the one you wanted.

Cause: every artifact in the confirmation dialog is labeled with how it will be handled, and artifacts marked "will be deleted" really are deleted after the rewind.

Correct approach: check the labels line by line; hover over any hint icons to read the explanation; if unsure, cancel first.

❌ The conversation gets longer and drifts off course, but you keep grinding on ​

Symptom: after the conversation gets too long, it starts "forgetting what it said earlier", while you keep patching things up in place.

Cause: official advice—when a session gets too long and goes off track, don't grind on; each session is an independent workbench.

Correct approach: start a new task and concisely restate the key background; save important artifacts elsewhere first.

Advanced tips (optional) ​

🔧 Back up important files before modifying them. Official advice: before having WorkBuddy modify documents, plans, or tables, first make a copy of the original file (add "_backup" or the current date to the filename); rewind does not yet support some file types, and the confirmation dialog will indicate this honestly.

🔧 Use the first round to set direction, then narrow down in later rounds. The official tips offer a three-round example: round 1 "Help me write an apology email to a client" → round 2 "Make the tone a bit more relaxed, within 200 words" → round 3 "Add a closing sentence at the end". For the full methodology, see 3.1 Prompt Recipes Methodology.

🔧 Upload files to add context. You can drag files into the input box or paste images with Ctrl/Cmd+V; supported formats cover PDF, Word, Excel, PPT, images, archive files, and common code files; file processing is done locally by default. For the full guide, see 2.3 Input Methods: The Full Guide.

🔧 Find files from the conversation in the results area. Files and links that appear in the conversation are displayed together in the results area on the right; for how to verify them, see 1.4 Your First Task.

Lesson Summary ​

✅ WorkBuddy conversations are the console for your tasks: locate (scale navigation) → advance (multi-round adjustments + message queue) → refine (references) → correct (rollback/edit/refresh) → fallback (interrupt and continue).

✅ Navigating long conversations: scale navigation = the "history of prompts" at the top, which lists only your prompts; click one to jump to it.

✅ Multi-round adjustments use three types of phrasing: adding requirements, adjusting results, and deeper analysis—none require restating the background.

✅ The quoting trio: select text / hover over a table / click a component icon → add to the conversation → annotate (optional) → send.

✅ Three correction options: rollback only goes back without regenerating; edit rewrites and reruns; refresh only applies to the last reply.

Key actions recap:

Key ActionRecommended PracticeBasis
Navigating long conversationsScale navigation / history of prompts / in-conversation searchOfficial task conversation docs
Multi-round adjustmentsSend incremental requirements directly without repeating the backgroundOfficial task conversation docs
Adding during executionMessages go into the queue and can be edited/deleted/reorderedOfficial task conversation docs
Precise editsQuote text/tables/components + annotateOfficial task conversation docs
Correcting directionRollback/edit/refresh; read the artifact confirmation dialog carefullyOfficial task conversation docs
Taking components awayCopy as image / save as image / copy codeOfficial task conversation docs

FAQ ​

What does WorkBuddy mean? ​

WorkBuddy is an AI tool that performs tasks through conversation: you have a multi-turn conversation with it within a task, and it combines context to generate deliverables such as reports, tables, and charts; the conversation area serves as a "task console." This lesson is based on WorkBuddy v5.9.3, and the operations follow the official "task conversation" documentation; see the Core Idea section for details.

What does WorkBuddy mean, and how does it differ from traditional chat AI? ​

WorkBuddy is not a chat-log-style AI, but a workflow with version tracking: messages and deliverables are bound to versions, so you can roll back (except the first message), edit any message, refresh the last reply, and when rolling back, files roll back too. Traditional chat AI can only append messages, and to reference something you have to copy and paste manually; WorkBuddy supports queuing messages during execution and one-click "add to conversation" for text and table components. See the table in the Core Idea section for a detailed comparison.

What does WorkBuddy mean, and what can it help me with day to day? ​

You can keep polishing results within a single task: add charts, change sorting, adjust the tone, point precisely at a specific piece of output and ask it to revise, add requirements at any time during execution, and safely roll back to a point in time when things go off track. It can also copy generated chart components as images, save them as images, or copy the code, ready to use directly in your reports. See What You Can Do After This Lesson for what's possible.

Next Lesson Preview ​

Once you get comfortable with conversations, you will open more and more tasks. The next lesson covers 2.2 Task Management: Status, Search, and Bulk Operations.

You will learn:

  • How the Tasks and Spaces sections are organized
  • What the six task statuses each mean
  • The four categories of global search and bulk operations
  • The rules for deleting tasks, to avoid accidental deletion
gaodong.aiAboutPrivacyContact

Independent tutorials, not affiliated with any product mentioned. Product names and trademarks belong to their owners. Check official pages for prices and policies.